dmesg - F1-A75-M Pro

Return To F1-A75-M Pro System Information

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-33-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #70-Ubuntu SMP Thu Jul 7 21:13:52 UTC 2011 (Ubuntu 2.6.32-33.70-generic 2.6.32.41+drm33.18)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf6cc000 (usable)
[    0.000000]  BIOS-e820: 00000000bf6cc000 - 00000000bf945000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf945000 - 00000000bfb48000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfb48000 - 00000000bfd16000 (usable)
[    0.000000]  BIOS-e820: 00000000bfd16000 - 00000000bfd63000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfd63000 - 00000000bfd6d000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfd6d000 - 00000000bfd70000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfd70000 - 00000000bfd71000 (usable)
[    0.000000]  BIOS-e820: 00000000bfd71000 - 00000000bfeaa000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfeaa000 - 00000000bfebb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfebb000 - 00000000bfecb000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfecb000 - 00000000bfecc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfecc000 - 00000000bfedc000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfedc000 - 00000000bfedd000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfedd000 - 00000000bfede000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfede000 - 00000000bfee4000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfee4000 - 00000000bfef7000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfef7000 - 00000000bff00000 (usable)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100001000 - 0000000120000000 (usable)
[    0.000000] DMI 2.6 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF00000000 write-back
[    0.000000]   1 base 00BFF00000 mask FFFFF00000 uncachable
[    0.000000]   2 base 00C0000000 mask FFC0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009d800 (usable)
[    0.000000]  modified: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000bf6cc000 (usable)
[    0.000000]  modified: 00000000bf6cc000 - 00000000bf945000 (reserved)
[    0.000000]  modified: 00000000bf945000 - 00000000bfb48000 (ACPI NVS)
[    0.000000]  modified: 00000000bfb48000 - 00000000bfd16000 (usable)
[    0.000000]  modified: 00000000bfd16000 - 00000000bfd63000 (ACPI NVS)
[    0.000000]  modified: 00000000bfd63000 - 00000000bfd6d000 (ACPI data)
[    0.000000]  modified: 00000000bfd6d000 - 00000000bfd70000 (ACPI NVS)
[    0.000000]  modified: 00000000bfd70000 - 00000000bfd71000 (usable)
[    0.000000]  modified: 00000000bfd71000 - 00000000bfeaa000 (reserved)
[    0.000000]  modified: 00000000bfeaa000 - 00000000bfebb000 (ACPI NVS)
[    0.000000]  modified: 00000000bfebb000 - 00000000bfecb000 (reserved)
[    0.000000]  modified: 00000000bfecb000 - 00000000bfecc000 (ACPI NVS)
[    0.000000]  modified: 00000000bfecc000 - 00000000bfedc000 (reserved)
[    0.000000]  modified: 00000000bfedc000 - 00000000bfedd000 (ACPI NVS)
[    0.000000]  modified: 00000000bfedd000 - 00000000bfede000 (reserved)
[    0.000000]  modified: 00000000bfede000 - 00000000bfee4000 (ACPI NVS)
[    0.000000]  modified: 00000000bfee4000 - 00000000bfef7000 (reserved)
[    0.000000]  modified: 00000000bfef7000 - 00000000bff00000 (usable)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  modified: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  modified: 00000000fed40000 - 00000000fed45000 (reserved)
[    0.000000]  modified: 00000000fed61000 - 00000000fed71000 (reserved)
[    0.000000]  modified: 00000000fed80000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100001000 - 0000000120000000 (usable)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000bff00000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 0080000000 page 1G
[    0.000000]  0080000000 - 00bfe00000 page 2M
[    0.000000]  00bfe00000 - 00bff00000 page 4k
[    0.000000] kernel direct mapping tables up to bff00000 @ 10000-13000
[    0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0100000000 - 0120000000 page 2M
[    0.000000] kernel direct mapping tables up to 120000000 @ 12000-14000
[    0.000000] RAMDISK: 377f4000 - 37fefc2f
[    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000bfd63068 00054 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000bfd6ab08 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
[    0.000000] ACPI: DSDT 00000000bfd63150 079B3 (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bfedef80 00040
[    0.000000] ACPI: APIC 00000000bfd6ac00 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000bfd6ac78 0003C (v01 A M I  GMCH945. 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bfd6acb8 00038 (v01 ALASKA    A M I 01072009 AMI  00000004)
[    0.000000] ACPI: SSDT 00000000bfd6acf0 00FD8 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 00000000bfd6bcc8 00695 (v02    AMD     ALIB 00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000120000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[    0.000000]   NODE_DATA [0000000000013000 - 0000000000017fff]
[    0.000000]   bootmap [0000000000018000 -  000000000003bfff] pages 24
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 0001a30a64]    TEXT DATA BSS ==> [0001000000 - 0001a30a64]
[    0.000000]   #3 [00377f4000 - 0037fefc2f]          RAMDISK ==> [00377f4000 - 0037fefc2f]
[    0.000000]   #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
[    0.000000]   #5 [0001a31000 - 0001a31332]              BRK ==> [0001a31000 - 0001a31332]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]
[    0.000000] found SMP MP-table at [ffff8800000fcf90] fcf90
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002b7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00120000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000bf6cc
[    0.000000]     0: 0x000bfb48 -> 0x000bfd16
[    0.000000]     0: 0x000bfd70 -> 0x000bfd71
[    0.000000]     0: 0x000bfef7 -> 0x000bff00
[    0.000000]     0: 0x00100001 -> 0x00120000
[    0.000000] On node 0 totalpages: 915504
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 104 pages reserved
[    0.000000]   DMA zone: 3821 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 766172 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 129279 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf6cc000 - 00000000bf945000
[    0.000000] PM: Registered nosave memory: 00000000bf945000 - 00000000bfb48000
[    0.000000] PM: Registered nosave memory: 00000000bfd16000 - 00000000bfd63000
[    0.000000] PM: Registered nosave memory: 00000000bfd63000 - 00000000bfd6d000
[    0.000000] PM: Registered nosave memory: 00000000bfd6d000 - 00000000bfd70000
[    0.000000] PM: Registered nosave memory: 00000000bfd71000 - 00000000bfeaa000
[    0.000000] PM: Registered nosave memory: 00000000bfeaa000 - 00000000bfebb000
[    0.000000] PM: Registered nosave memory: 00000000bfebb000 - 00000000bfecb000
[    0.000000] PM: Registered nosave memory: 00000000bfecb000 - 00000000bfecc000
[    0.000000] PM: Registered nosave memory: 00000000bfecc000 - 00000000bfedc000
[    0.000000] PM: Registered nosave memory: 00000000bfedc000 - 00000000bfedd000
[    0.000000] PM: Registered nosave memory: 00000000bfedd000 - 00000000bfede000
[    0.000000] PM: Registered nosave memory: 00000000bfede000 - 00000000bfee4000
[    0.000000] PM: Registered nosave memory: 00000000bfee4000 - 00000000bfef7000
[    0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[    0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[    0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
[    0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[    0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed61000
[    0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[    0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[    0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[    0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91864 r8192 d22824 u524288
[    0.000000] pcpu-alloc: s91864 r8192 d22824 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 899272
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[    0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[    0.000000] Memory: 3525536k/4718592k available (5412k kernel code, 1056576k absent, 136480k reserved, 2981k data, 888k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 36700160 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2986.854 MHz processor.
[    0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5973.70 BogoMIPS (lpj=29868500)
[    0.010021] Security Framework initialized
[    0.010035] AppArmor: AppArmor initialized
[    0.010295] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.011233] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.011640] Mount-cache hash table entries: 256
[    0.011729] Initializing cgroup subsys ns
[    0.011732] Initializing cgroup subsys cpuacct
[    0.011734] Initializing cgroup subsys memory
[    0.011740] Initializing cgroup subsys devices
[    0.011742] Initializing cgroup subsys freezer
[    0.011743] Initializing cgroup subsys net_cls
[    0.011759] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.011761] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.011763] CPU 0/0x0 -> Node 0
[    0.011765] CPU: Physical Processor ID: 0
[    0.011766] CPU: Processor Core ID: 0
[    0.011768] mce: CPU supports 6 MCE banks
[    0.011776] Performance Events: AMD PMU driver.
[    0.011780] ... version:                0
[    0.011781] ... bit width:              48
[    0.011782] ... generic registers:      4
[    0.011783] ... value mask:             0000ffffffffffff
[    0.011784] ... max period:             00007fffffffffff
[    0.011786] ... fixed-purpose events:   0
[    0.011787] ... event mask:             000000000000000f
[    0.013817] ACPI: Core revision 20090903
[    0.030006] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.030010] ftrace: allocating 22478 entries in 89 pages
[    0.038453] Setting APIC routing to flat
[    0.038717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.139302] CPU0: AMD A8-3850 APU with Radeon(tm) HD Graphics stepping 00
[    0.140000] Booting processor 1 APIC 0x1 ip 0x6000
[    0.020000] Initializing CPU#1
[    0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.020000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.020000] CPU 1/0x1 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 1
[    0.290068] CPU1: AMD A8-3850 APU with Radeon(tm) HD Graphics stepping 00
[    0.290074] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.300051] Booting processor 2 APIC 0x2 ip 0x6000
[    0.020000] Initializing CPU#2
[    0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.020000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.020000] CPU 2/0x2 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 2
[    0.460055] CPU2: AMD A8-3850 APU with Radeon(tm) HD Graphics stepping 00
[    0.460060] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.470046] Booting processor 3 APIC 0x3 ip 0x6000
[    0.020000] Initializing CPU#3
[    0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.020000] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.020000] CPU 3/0x3 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 3
[    0.630039] CPU3: AMD A8-3850 APU with Radeon(tm) HD Graphics stepping 00
[    0.630043] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.640009] Brought up 4 CPUs
[    0.640011] Total of 4 processors activated (23896.95 BogoMIPS).
[    0.640490] CPU0 attaching sched-domain:
[    0.640494]  domain 0: span 0-3 level MC
[    0.640496]   groups: 0 1 2 3
[    0.640501] CPU1 attaching sched-domain:
[    0.640503]  domain 0: span 0-3 level MC
[    0.640504]   groups: 1 2 3 0
[    0.640507] CPU2 attaching sched-domain:
[    0.640508]  domain 0: span 0-3 level MC
[    0.640509]   groups: 2 3 0 1
[    0.640512] CPU3 attaching sched-domain:
[    0.640513]  domain 0: span 0-3 level MC
[    0.640514]   groups: 3 0 1 2
[    0.640590] devtmpfs: initialized
[    0.640590] regulator: core version 0.5
[    0.640590] Time:  1:52:05  Date: 07/18/11
[    0.640590] NET: Registered protocol family 16
[    0.640590] ACPI: bus type pci registered
[    0.640590] Trying to unpack rootfs image as initramfs...
[    0.640590] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.640590] PCI: MCFG area at e0000000 reserved in E820
[    0.653103] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.653104] PCI: Using configuration type 1 for base access
[    0.653497] bio: create slab  at 0
[    0.653637] ACPI: EC: Look up EC in DSDT
[    0.653637] ACPI: Executed 1 blocks of module-level executable AML code
[    0.654080] ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
[    0.654085] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20090903/nsinit-338)
[    0.660261] ACPI: Interpreter enabled
[    0.660263] ACPI: (supports S0 S3 S4 S5)
[    0.660277] ACPI: Using IOAPIC for interrupt routing
[    0.668079] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    0.668371] ACPI: No dock devices found.
[    0.668754] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.668818] pci 0000:00:01.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[    0.668823] pci 0000:00:01.0: reg 14 io port: [0xf000-0xf0ff]
[    0.668827] pci 0000:00:01.0: reg 18 32bit mmio: [0xfeb00000-0xfeb3ffff]
[    0.668851] pci 0000:00:01.0: supports D1 D2
[    0.668873] pci 0000:00:01.1: reg 10 32bit mmio: [0xfeb40000-0xfeb43fff]
[    0.668901] pci 0000:00:01.1: supports D1 D2
[    0.668971] pci 0000:00:10.0: reg 10 64bit mmio: [0xfeb46000-0xfeb47fff]
[    0.669031] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.669035] pci 0000:00:10.0: PME# disabled
[    0.669094] pci 0000:00:10.1: reg 10 64bit mmio: [0xfeb44000-0xfeb45fff]
[    0.669154] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[    0.669158] pci 0000:00:10.1: PME# disabled
[    0.669210] pci 0000:00:11.0: reg 10 io port: [0xf140-0xf147]
[    0.669215] pci 0000:00:11.0: reg 14 io port: [0xf130-0xf133]
[    0.669221] pci 0000:00:11.0: reg 18 io port: [0xf120-0xf127]
[    0.669227] pci 0000:00:11.0: reg 1c io port: [0xf110-0xf113]
[    0.669233] pci 0000:00:11.0: reg 20 io port: [0xf100-0xf10f]
[    0.669238] pci 0000:00:11.0: reg 24 32bit mmio: [0xfeb4d000-0xfeb4d7ff]
[    0.669286] pci 0000:00:12.0: reg 10 32bit mmio: [0xfeb4c000-0xfeb4cfff]
[    0.669350] pci 0000:00:12.2: reg 10 32bit mmio: [0xfeb4b000-0xfeb4b0ff]
[    0.669396] pci 0000:00:12.2: supports D1 D2
[    0.669397] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.669401] pci 0000:00:12.2: PME# disabled
[    0.669429] pci 0000:00:13.0: reg 10 32bit mmio: [0xfeb4a000-0xfeb4afff]
[    0.669493] pci 0000:00:13.2: reg 10 32bit mmio: [0xfeb49000-0xfeb490ff]
[    0.669538] pci 0000:00:13.2: supports D1 D2
[    0.669540] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.669543] pci 0000:00:13.2: PME# disabled
[    0.669687] pci 0000:00:14.5: reg 10 32bit mmio: [0xfeb48000-0xfeb48fff]
[    0.669773] pci 0000:00:15.0: supports D1 D2
[    0.669836] pci 0000:00:15.1: supports D1 D2
[    0.669901] pci 0000:00:15.2: supports D1 D2
[    0.670216] pci 0000:01:05.0: reg 10 io port: [0xe000-0xe01f]
[    0.670269] pci 0000:01:05.0: supports D1 D2
[    0.670305] pci 0000:01:05.1: reg 10 io port: [0xe020-0xe027]
[    0.670358] pci 0000:01:05.1: supports D1 D2
[    0.670398] pci 0000:01:05.2: reg 10 32bit mmio: [0xfea04000-0xfea047ff]
[    0.670405] pci 0000:01:05.2: reg 14 32bit mmio: [0xfea00000-0xfea03fff]
[    0.670458] pci 0000:01:05.2: supports D1 D2
[    0.670459] pci 0000:01:05.2: PME# supported from D0 D1 D2 D3hot
[    0.670463] pci 0000:01:05.2: PME# disabled
[    0.670514] pci 0000:00:14.4: transparent bridge
[    0.670517] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[    0.670521] pci 0000:00:14.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[    0.670615] pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff]
[    0.670635] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xd0004000-0xd0004fff]
[    0.670648] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xd0000000-0xd0003fff]
[    0.670693] pci 0000:03:00.0: supports D1 D2
[    0.670695] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.670699] pci 0000:03:00.0: PME# disabled
[    0.670761] pci 0000:00:15.1: bridge io port: [0xd000-0xdfff]
[    0.670768] pci 0000:00:15.1: bridge 64bit mmio pref: [0xd0000000-0xd00fffff]
[    0.670828] pci 0000:04:00.0: reg 10 64bit mmio: [0xfe900000-0xfe907fff]
[    0.670908] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.670913] pci 0000:04:00.0: PME# disabled
[    0.670971] pci 0000:00:15.2: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[    0.670995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.671171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[    0.671218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[    0.671269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
[    0.671331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.676326] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
[    0.676425] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
[    0.676524] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
[    0.676622] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
[    0.676721] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
[    0.676819] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
[    0.676917] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
[    0.677016] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
[    0.677115] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
[    0.677213] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
[    0.677312] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
[    0.677410] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
[    0.677508] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
[    0.677607] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
[    0.677705] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
[    0.677804] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
[    0.677903] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
[    0.678002] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
[    0.678100] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
[    0.678199] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
[    0.678299] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
[    0.678397] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
[    0.678496] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
[    0.678595] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
[    0.678696] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
[    0.678795] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
[    0.678893] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
[    0.678991] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
[    0.679090] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
[    0.679188] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
[    0.679286] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
[    0.679384] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
[    0.679480] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.679626] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.679775] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.679925] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.680090] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.680193] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.680295] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.680398] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.680477] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.680486] vgaarb: loaded
[    0.680559] SCSI subsystem initialized
[    0.680573] libata version 3.00 loaded.
[    0.680573] usbcore: registered new interface driver usbfs
[    0.680573] usbcore: registered new interface driver hub
[    0.680573] usbcore: registered new device driver usb
[    0.680573] ACPI: WMI: Mapper loaded
[    0.680573] PCI: Using ACPI for IRQ routing
[    0.680573] NetLabel: Initializing
[    0.680573] NetLabel:  domain hash size = 128
[    0.680573] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.680573] NetLabel:  unlabeled traffic allowed by default
[    0.680573] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.680573] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.682227] Switching to clocksource tsc
[    0.683235] AppArmor: AppArmor Filesystem Enabled
[    0.683235] pnp: PnP ACPI init
[    0.683235] ACPI: bus type pnp registered
[    0.684064] pnp: PnP ACPI: found 12 devices
[    0.684065] ACPI: ACPI bus type pnp unregistered
[    0.684074] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.684079] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.684081] system 00:02: ioport range 0x40b-0x40b has been reserved
[    0.684083] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[    0.684084] system 00:02: ioport range 0xc00-0xc01 has been reserved
[    0.684086] system 00:02: ioport range 0xc14-0xc14 has been reserved
[    0.684088] system 00:02: ioport range 0xc50-0xc51 has been reserved
[    0.684092] system 00:02: ioport range 0xc52-0xc52 has been reserved
[    0.684094] system 00:02: ioport range 0xc6c-0xc6c has been reserved
[    0.684096] system 00:02: ioport range 0xc6f-0xc6f has been reserved
[    0.684097] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
[    0.684099] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
[    0.684101] system 00:02: ioport range 0xcd4-0xcd5 has been reserved
[    0.684103] system 00:02: ioport range 0xcd6-0xcd7 has been reserved
[    0.684105] system 00:02: ioport range 0xcd8-0xcdf has been reserved
[    0.684107] system 00:02: ioport range 0x800-0x89f has been reserved
[    0.684109] system 00:02: ioport range 0xb20-0xb3f has been reserved
[    0.684111] system 00:02: ioport range 0x900-0x90f has been reserved
[    0.684113] system 00:02: ioport range 0x910-0x91f has been reserved
[    0.684115] system 00:02: ioport range 0xfe00-0xfefe has been reserved
[    0.684118] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.684120] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.684122] system 00:02: iomem range 0xfed80000-0xfed8ffff has been reserved
[    0.684124] system 00:02: iomem range 0xfed61000-0xfed70fff has been reserved
[    0.684127] system 00:02: iomem range 0xfec10000-0xfec10fff has been reserved
[    0.684129] system 00:02: iomem range 0xfed00000-0xfed00fff has been reserved
[    0.684131] system 00:02: iomem range 0xff000000-0xffffffff has been reserved
[    0.684135] system 00:03: ioport range 0x300-0x31f has been reserved
[    0.684136] system 00:03: ioport range 0x290-0x29f has been reserved
[    0.684138] system 00:03: ioport range 0x230-0x23f has been reserved
[    0.684142] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.684146] system 00:09: ioport range 0x1770-0x1777 has been reserved
[    0.688802] pci 0000:00:14.4: PCI bridge, secondary bus 0000:01
[    0.688805] pci 0000:00:14.4:   IO window: 0xe000-0xefff
[    0.688809] pci 0000:00:14.4:   MEM window: 0xfea00000-0xfeafffff
[    0.688813] pci 0000:00:14.4:   PREFETCH window: disabled
[    0.688819] pci 0000:00:15.0: PCI bridge, secondary bus 0000:02
[    0.688820] pci 0000:00:15.0:   IO window: disabled
[    0.688824] pci 0000:00:15.0:   MEM window: disabled
[    0.688827] pci 0000:00:15.0:   PREFETCH window: disabled
[    0.688832] pci 0000:00:15.1: PCI bridge, secondary bus 0000:03
[    0.688835] pci 0000:00:15.1:   IO window: 0xd000-0xdfff
[    0.688839] pci 0000:00:15.1:   MEM window: disabled
[    0.688842] pci 0000:00:15.1:   PREFETCH window: 0x000000d0000000-0x000000d00fffff
[    0.688847] pci 0000:00:15.2: PCI bridge, secondary bus 0000:04
[    0.688849] pci 0000:00:15.2:   IO window: disabled
[    0.688853] pci 0000:00:15.2:   MEM window: 0xfe900000-0xfe9fffff
[    0.688856] pci 0000:00:15.2:   PREFETCH window: disabled
[    0.688873]   alloc irq_desc for 16 on node -1
[    0.688874]   alloc kstat_irqs on node -1
[    0.688878] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.688882] pci 0000:00:15.0: setting latency timer to 64
[    0.688889] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.688892] pci 0000:00:15.1: setting latency timer to 64
[    0.688899] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.688902] pci 0000:00:15.2: setting latency timer to 64
[    0.688906] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.688908] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.688910] pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
[    0.688912] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.688914] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.688915] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.688917] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
[    0.688919] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xd00fffff]
[    0.688921] pci_bus 0000:04: resource 1 mem: [0xfe900000-0xfe9fffff]
[    0.688948] NET: Registered protocol family 2
[    0.689057] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.689834] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.691964] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.692228] TCP: Hash tables configured (established 524288 bind 65536)
[    0.692230] TCP reno registered
[    0.692298] NET: Registered protocol family 1
[    0.692312] pci 0000:00:01.0: Boot video device
[    1.297164] Scanning for low memory corruption every 60 seconds
[    1.297241] audit: initializing netlink socket (disabled)
[    1.297248] type=2000 audit(1310953925.296:1): initialized
[    1.303145] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.304000] VFS: Disk quotas dquot_6.5.2
[    1.304032] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.304412] fuse init (API version 7.13)
[    1.304460] msgmni has been set to 6885
[    1.304648] alg: No test for stdrng (krng)
[    1.304682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.304685] io scheduler noop registered
[    1.304686] io scheduler anticipatory registered
[    1.304688] io scheduler deadline registered
[    1.304709] io scheduler cfq registered (default)
[    1.304828]   alloc irq_desc for 24 on node -1
[    1.304830]   alloc kstat_irqs on node -1
[    1.304839] pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
[    1.304847] pcieport 0000:00:15.0: setting latency timer to 64
[    1.304946]   alloc irq_desc for 25 on node -1
[    1.304948]   alloc kstat_irqs on node -1
[    1.304954] pcieport 0000:00:15.1: irq 25 for MSI/MSI-X
[    1.304961] pcieport 0000:00:15.1: setting latency timer to 64
[    1.305058]   alloc irq_desc for 26 on node -1
[    1.305059]   alloc kstat_irqs on node -1
[    1.305065] pcieport 0000:00:15.2: irq 26 for MSI/MSI-X
[    1.305072] pcieport 0000:00:15.2: setting latency timer to 64
[    1.305128] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.305142] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.305212] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.305215] ACPI: Power Button [PWRB]
[    1.305242] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.305244] ACPI: Power Button [PWRF]
[    1.305528] processor LNXCPU:00: registered as cooling_device0
[    1.305616] processor LNXCPU:01: registered as cooling_device1
[    1.305766] processor LNXCPU:02: registered as cooling_device2
[    1.305892] processor LNXCPU:03: registered as cooling_device3
[    1.309180] Linux agpgart interface v0.103
[    1.309292] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.309512] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.310059] brd: module loaded
[    1.310303] loop: module loaded
[    1.310355] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.310592] Fixed MDIO Bus: probed
[    1.310612] PPP generic driver version 2.4.2
[    1.310629] tun: Universal TUN/TAP device driver, 1.6
[    1.310630] tun: (C) 1999-2004 Max Krasnyansky 
[    1.310672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.310689]   alloc irq_desc for 17 on node -1
[    1.310690]   alloc kstat_irqs on node -1
[    1.310696] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.310721] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.310744] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.310755] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[    1.310776] ehci_hcd 0000:00:12.2: debug port 1
[    1.310793] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4b000
[    1.321294] Freeing initrd memory: 8175k freed
[    1.327021] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.327174] usb usb1: configuration #1 chosen from 1 choice
[    1.327230] hub 1-0:1.0: USB hub found
[    1.327244] hub 1-0:1.0: 5 ports detected
[    1.327283] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.327291] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.327308] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.327318] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[    1.327332] ehci_hcd 0000:00:13.2: debug port 1
[    1.327342] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb49000
[    1.347004] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.347143] usb usb2: configuration #1 chosen from 1 choice
[    1.347191] hub 2-0:1.0: USB hub found
[    1.347203] hub 2-0:1.0: 5 ports detected
[    1.347260] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.347269]   alloc irq_desc for 18 on node -1
[    1.347270]   alloc kstat_irqs on node -1
[    1.347272] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.347280] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.347297] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.347312] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4c000
[    1.411048] usb usb3: configuration #1 chosen from 1 choice
[    1.411061] hub 3-0:1.0: USB hub found
[    1.411067] hub 3-0:1.0: 5 ports detected
[    1.411099] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.411106] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.411124] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.411134] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4a000
[    1.471054] usb usb4: configuration #1 chosen from 1 choice
[    1.471072] hub 4-0:1.0: USB hub found
[    1.471077] hub 4-0:1.0: 5 ports detected
[    1.471110] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.471117] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.471138] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
[    1.471147] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb48000
[    1.531058] usb usb5: configuration #1 chosen from 1 choice
[    1.531072] hub 5-0:1.0: USB hub found
[    1.531077] hub 5-0:1.0: 2 ports detected
[    1.531106] uhci_hcd: USB Universal Host Controller Interface driver
[    1.531148] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.531150] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.531252] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.531332] mice: PS/2 mouse device common for all mice
[    1.531390] rtc_cmos 00:05: RTC can wake from S4
[    1.531414] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.531432] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.531512] device-mapper: uevent: version 1.0.3
[    1.531597] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.531777] device-mapper: multipath: version 1.1.0 loaded
[    1.531778] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.532152] cpuidle: using governor ladder
[    1.532242] cpuidle: using governor menu
[    1.532486] TCP cubic registered
[    1.532580] NET: Registered protocol family 10
[    1.533055] NET: Registered protocol family 17
[    1.533089] powernow-k8: Found 1 AMD A8-3850 APU with Radeon(tm) HD Graphics processors (4 cpu cores) (version 2.20.00)
[    1.533175] powernow-k8:    0 : pstate 0 (2900 MHz)
[    1.533177] powernow-k8:    1 : pstate 1 (2600 MHz)
[    1.533178] powernow-k8:    2 : pstate 2 (2300 MHz)
[    1.533179] powernow-k8:    3 : pstate 3 (2000 MHz)
[    1.533181] powernow-k8:    4 : pstate 4 (1800 MHz)
[    1.533182] powernow-k8:    5 : pstate 5 (1400 MHz)
[    1.533183] powernow-k8:    6 : pstate 6 (1100 MHz)
[    1.533185] powernow-k8:    7 : pstate 7 (800 MHz)
[    1.533186] [Firmware Warn]: powernow-k8: Invalid zero transition latency
[    1.533354] [Firmware Warn]: powernow-k8: Invalid zero transition latency
[    1.533529] [Firmware Warn]: powernow-k8: Invalid zero transition latency
[    1.533714] [Firmware Warn]: powernow-k8: Invalid zero transition latency
[    1.533802] PM: Resume from disk failed.
[    1.533810] registered taskstats version 1
[    1.534212]   Magic number: 3:799:862
[    1.534266] rtc_cmos 00:05: setting system clock to 2011-07-18 01:52:06 UTC (1310953926)
[    1.534269] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.534270] EDD information not available.
[    1.534335] Freeing unused kernel memory: 888k freed
[    1.534505] Write protecting the kernel read-only data: 7688k
[    1.545025] udev: starting version 151
[    1.557928] ahci 0000:00:11.0: version 3.0
[    1.557941]   alloc irq_desc for 19 on node -1
[    1.557942]   alloc kstat_irqs on node -1
[    1.557949] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.557993]   alloc irq_desc for 27 on node -1
[    1.557995]   alloc kstat_irqs on node -1
[    1.558003] ahci 0000:00:11.0: irq 27 for MSI/MSI-X
[    1.558088] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.558091] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
[    1.565480] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.567814] scsi0 : ahci
[    1.571432] scsi1 : ahci
[    1.581113] scsi2 : ahci
[    1.587912] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.587935] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.587989] r8169 0000:03:00.0: setting latency timer to 64
[    1.587995] r8169 0000:03:00.0: unknown MAC, using family default
[    1.588051]   alloc irq_desc for 28 on node -1
[    1.588052]   alloc kstat_irqs on node -1
[    1.588065] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[    1.588472] eth0: RTL8168b/8111b at 0xffffc90000664000, 14:da:e9:08:85:d3, XID 0c900800 IRQ 28
[    1.590044] scsi3 : ahci
[    1.592045]   alloc irq_desc for 21 on node -1
[    1.592047]   alloc kstat_irqs on node -1
[    1.592053] ohci1394 0000:01:05.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.595013] scsi4 : ahci
[    1.595115] scsi5 : ahci
[    1.595672] ata1: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d100 irq 27
[    1.595675] ata2: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d180 irq 27
[    1.595678] ata3: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d200 irq 27
[    1.595680] ata4: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d280 irq 27
[    1.595682] ata5: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d300 irq 27
[    1.595685] ata6: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d380 irq 27
[    1.652318] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[fea04000-fea047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    1.940027] usb 4-3: new low speed USB device using ohci_hcd and address 2
[    1.940067] ata5: SATA link down (SStatus 0 SControl 300)
[    1.940086] ata4: SATA link down (SStatus 0 SControl 300)
[    1.940095] ata6: SATA link down (SStatus 0 SControl 300)
[    2.120030] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.120054] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.120060] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.120666] ata2.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    2.120673] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.121422] ata2.00: configured for UDMA/133
[    2.122436] ata1.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
[    2.122444] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.123248] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
[    2.124235] ata1.00: configured for UDMA/133
[    2.127598] ata3.00: configured for UDMA/100
[    2.132231] usb 4-3: configuration #1 chosen from 1 choice
[    2.143556] usbcore: registered new interface driver hiddev
[    2.144030] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[    2.144191] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.144253] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.144279] sd 0:0:0:0: [sda] Write Protect is off
[    2.144281] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.144293] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.144362] scsi 1:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    2.144389]  sda:
[    2.144442] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.144456] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.144501] sd 1:0:0:0: [sdb] Write Protect is off
[    2.144503] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.144548] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.144671]  sdb:
[    2.147379] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb4/4-3/4-3:1.0/input/input4
[    2.147414]  sdb1
[    2.147507] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input0
[    2.147736] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.153229] generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input1
[    2.153273] usbcore: registered new interface driver usbhid
[    2.153279] usbhid: v2.6:USB HID core driver
[    2.158878]  sda1 sda2 <
[    2.162953] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS70  EX00 PQ: 0 ANSI: 5
[    2.179925]  sda5 >
[    2.180253] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.183604] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.183612] Uniform CD-ROM driver Revision: 3.20
[    2.183779] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.183849] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.379726] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.379731] EXT4-fs (sda1): write access will be enabled during recovery
[    2.734112] EXT4-fs (sda1): orphan cleanup on readonly fs
[    2.734123] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 23330843
[    2.734148] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 23330842
[    2.734153] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 23330832
[    2.734161] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5505224
[    2.750050] EXT4-fs (sda1): 4 orphan inodes deleted
[    2.750057] EXT4-fs (sda1): recovery complete
[    2.970365] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c003100a50f]
[    3.286384] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   11.307000] udev: starting version 151
[   11.320262] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   11.320300] xhci_hcd 0000:00:10.0: setting latency timer to 64
[   11.320303] xhci_hcd 0000:00:10.0: xHCI Host Controller
[   11.320357] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[   11.320530] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb46000
[   11.327118] lp: driver loaded but no devices found
[   11.333295] vga16fb: initializing
[   11.333298] vga16fb: mapped to 0xffff8800000a0000
[   11.333342] fb0: VGA16 VGA frame buffer device
[   11.361349] usb usb6: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[   11.361444] usb usb6: configuration #1 chosen from 1 choice
[   11.361449] xHCI xhci_add_endpoint called for root hub
[   11.361450] xHCI xhci_check_bandwidth called for root hub
[   11.361473] hub 6-0:1.0: USB hub found
[   11.361481] hub 6-0:1.0: 4 ports detected
[   11.361551] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   11.361578] xhci_hcd 0000:00:10.1: setting latency timer to 64
[   11.361581] xhci_hcd 0000:00:10.1: xHCI Host Controller
[   11.361615] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
[   11.361787] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb44000
[   11.365332] usb usb7: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[   11.365395] usb usb7: configuration #1 chosen from 1 choice
[   11.365398] xHCI xhci_add_endpoint called for root hub
[   11.365399] xHCI xhci_check_bandwidth called for root hub
[   11.365430] hub 7-0:1.0: USB hub found
[   11.365435] hub 7-0:1.0: 4 ports detected
[   11.365500] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   11.365512] xhci_hcd 0000:04:00.0: setting latency timer to 64
[   11.365515] xhci_hcd 0000:04:00.0: xHCI Host Controller
[   11.365545] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[   11.372342] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   11.372346] Disabling lock debugging due to kernel taint
[   11.408391] xhci_hcd 0000:04:00.0: irq 18, io mem 0xfe900000
[   11.408454] usb usb8: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[   11.408546] usb usb8: configuration #1 chosen from 1 choice
[   11.408550] xHCI xhci_add_endpoint called for root hub
[   11.408552] xHCI xhci_check_bandwidth called for root hub
[   11.408574] hub 8-0:1.0: USB hub found
[   11.408579] hub 8-0:1.0: 4 ports detected
[   11.413299] Adding 9033720k swap on /dev/sda5.  Priority:-1 extents:1 across:9033720k 
[   11.449028] [fglrx] Maximum main memory to use for locked dma buffers: 3298 MBytes.
[   11.449039] [fglrx]   vendor: 1002 device: 9640 count: 1
[   11.449311] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   11.449415] [fglrx] ioport: bar 1, base 0xf000, size: 0x100
[   11.449428] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   11.449432] pci 0000:00:01.0: setting latency timer to 64
[   11.449805] [fglrx] Kernel PAT support is enabled
[   11.449821] [fglrx] module loaded - fglrx 8.86.5 [May 24 2011] with 1 minors
[   11.473244] gameport: EMU10K1 is pci0000:01:05.1/gameport0, io 0xe020, speed 788kHz
[   11.486114] type=1505 audit(1310953936.449:2):  operation="profile_load" pid=772 name="/sbin/dhclient3"
[   11.486306] type=1505 audit(1310953936.449:3):  operation="profile_load" pid=772 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.486416] type=1505 audit(1310953936.449:4):  operation="profile_load" pid=772 name="/usr/lib/connman/scripts/dhclient-script"
[   11.487202] type=1505 audit(1310953936.449:5):  operation="profile_replace" pid=778 name="/sbin/dhclient3"
[   11.487396] type=1505 audit(1310953936.449:6):  operation="profile_replace" pid=778 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.487506] type=1505 audit(1310953936.449:7):  operation="profile_replace" pid=778 name="/usr/lib/connman/scripts/dhclient-script"
[   11.512761] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   11.512810] HDA Intel 0000:00:01.1: setting latency timer to 64
[   11.522084]   alloc irq_desc for 20 on node -1
[   11.522086]   alloc kstat_irqs on node -1
[   11.522092] EMU10K1_Audigy 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   11.556322] Console: switching to colour frame buffer device 80x30
[   11.631417] type=1505 audit(1310953936.589:8):  operation="profile_load" pid=964 name="/usr/share/gdm/guest-session/Xsession"
[   11.631631] type=1505 audit(1310953936.589:9):  operation="profile_replace" pid=965 name="/sbin/dhclient3"
[   11.631834] type=1505 audit(1310953936.589:10):  operation="profile_replace" pid=965 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.631947] type=1505 audit(1310953936.589:11):  operation="profile_replace" pid=965 name="/usr/lib/connman/scripts/dhclient-script"
[   11.651542] r8169: eth0: link up
[   11.651563] r8169: eth0: link up
[   11.680123] usb 6-4: new high speed USB device using xhci_hcd and address 0
[   11.701132] xhci_hcd 0000:00:10.0: WARN: short transfer on control ep
[   11.701753] xhci_hcd 0000:00:10.0: WARN: short transfer on control ep
[   11.702378] xhci_hcd 0000:00:10.0: WARN: short transfer on control ep
[   11.703253] xhci_hcd 0000:00:10.0: WARN: short transfer on control ep
[   11.703488] usb 6-4: configuration #1 chosen from 4 choices
[   11.703501] usb 6-4: ep 0x83 - rounding interval to 512 microframes
[   11.705006] xhci_hcd 0000:00:10.0: WARN: short transfer on control ep
[   11.705225] usb 6-4: ep 0x83 - rounding interval to 512 microframes
[   11.707755] xhci_hcd 0000:00:10.0: WARN: short transfer on control ep
[   11.892523] usb 8-3: new full speed USB device using xhci_hcd and address 0
[   11.923391] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.923621] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.923840] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.924072] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.924165] usb 8-3: configuration #1 chosen from 1 choice
[   11.930402] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   11.930512] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C
[   11.930525] usbcore: registered new interface driver usblp
[   12.222895] xhci_hcd 0000:00:10.0: WARN: short transfer on control ep
[   12.223919] xhci_hcd 0000:00:10.0: WARN: short transfer on control ep
[   12.321828] ppdev: user-space parallel port driver
[   12.789809]   alloc irq_desc for 29 on node -1
[   12.789812]   alloc kstat_irqs on node -1
[   12.789821] fglrx_pci 0000:00:01.0: irq 29 for MSI/MSI-X
[   12.790282] [fglrx] Firegl kernel thread PID: 1261
[   12.790327] [fglrx] Firegl kernel thread PID: 1262
[   12.790368] [fglrx] Firegl kernel thread PID: 1263
[   12.790510] [fglrx] IRQ 29 Enabled
[   12.878393] [fglrx] Gart USWC size:1080 M.
[   12.878396] [fglrx] Gart cacheable size:427 M.
[   12.878400] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   12.878402] [fglrx] Reserved FB block: Unshared offset:fc9d000, size:363000 
[   12.878404] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000 
[   13.269363] usb 8-3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[   13.269610] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   17.951607] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
[   22.250017] eth0: no IPv6 routers present
[ 3124.649238] xhci_hcd 0000:00:10.0: WARN: transfer error on endpoint
[ 3124.650093] usb 6-4: USB disconnect, address 2

Return To F1-A75-M Pro System Information